The Argus G3 ships with two pods in the box. Most buyers assume both pods work the same way and simply pick a wattage. They do not. The 0.4Ω and 0.7Ω Argus Top Fill Cartridge V2 pods are designed for different wattage ranges, different nicotine types, and different draw styles. Buy this kit, load the wrong liquid into the wrong pod at the wrong wattage, and you will burn the coil on day one. With no return option on hardware, that is a 3,800 BDT decision that needs to be made correctly the first time.
This review covers exactly that decision. We also address the authenticity question, because the Argus G3 is counterfeit-targeted in Dhaka at a rate that makes the security check non-optional before you pay.
The VOOPOO Argus G3 is a 5-30W draw-activated pod kit with a built-in 1500mAh battery and a 0.96-inch TFT screen. It includes two Argus Top Fill Cartridge V2 pods: a 0.7Ω pod (chip-limited to 18W maximum, suited to salt nicotine and tight MTL draws) and a 0.4Ω pod (chip-limited to 30W maximum, suited to freebase e-liquid and RDL draws). Both pods hold 3ml and use the iCOSM CODE 2.0 coil platform. KandyVape stocks this in Midnight Black, Space Gray, and Diamond Pink at 3,800 BDT, with daily dispatch at 3:00 PM including weekends.
The Device at a Glance: What the Specs Actually Mean
The Argus G3 runs on VOOPOO’s GENE.AI 2.0 chipset, which handles one task that matters more than any headline spec: it reads the resistance of whichever pod you insert and automatically limits the maximum selectable wattage to the appropriate ceiling for that coil. You cannot accidentally push the 0.7Ω pod past 18W and burn it, because the chip will not let you. That auto-sense function is what separates this from cheaper hardware where nothing stops you from frying a coil.
Here are the verified device specifications:
| Specification | Value | Source |
| Battery | 1500mAh built-in | VOOPOO official / VapingHardware |
| Power range | 5-30W (adjustable in 1W steps) | VOOPOO official |
| Output voltage | 3.3-4.35V | VOOPOO official |
| Resistance range | 0.4-3.0Ω | VOOPOO official |
| Charging | Type-C, 5V/2A | VOOPOO official |
| Charge time | ~45 minutes (VOOPOO rated); two independent reviews recorded 37-38 minutes | VOOPOO rated / VapingHardware / Vaping360 |
| Screen | 0.96-inch TFT color display | VOOPOO official |
| Chipset | GENE.AI 2.0 | VOOPOO official |
| Dimensions | 120mm x 26.4mm x 15.1mm (with pod) | VOOPOO official |
| Weight | 54.1g (device only); 61.75g with 3ml pod | VapingHardware measured |
| Construction | Zinc Alloy frame, PCTG panels | VapingHardware |
| Firing method | Draw-activated only | Multiple independent reviews |
| Pod capacity | 3ml (standard version) | VOOPOO official |
One spec worth flagging: the Argus G3 is draw-activated only. The single side button handles all navigation — waking the screen, changing themes, adjusting wattage — but it does not fire the device. This is a change from the Argus G2, which offered both button and draw activation.
If you prefer button-fire, the G3 is not the right choice.
Pod Specifications and the Wattage Pairing That Actually Matters
The Argus Top Fill Cartridge V2 is available in three resistances: 0.4Ω, 0.7Ω, and 1.0Ω. The kit includes the 0.4Ω and 0.7Ω pods. The 1.0Ω pod is available separately. You can verify the full pod listing on the VOOPOO official cartridge page.
Here is the coil-to-wattage-to-liquid pairing table. The wattage ranges are chip-confirmed via VapingHardware’s hands-on review, which documented the GENE.AI 2.0 auto-sense behavior in detail. The liquid recommendations follow from the physics of resistance and temperature.
| Pod | Resistance | Device wattage ceiling | Chip auto-sets to | Draw style | Recommended liquid type | Recommended nicotine |
| Argus Top Fill V2 | 0.7Ω | 18W maximum | 16W (optimum) | MTL to light RDL | 50/50 VG/PG or salt nicotine blends | Salt nicotine 20-50mg, or freebase 3-12mg |
| Argus Top Fill V2 | 0.4Ω | 30W maximum | 25W (optimum) | RDL | 70/30 VG/PG freebase | Freebase 3-6mg |
| Argus Top Fill V2 | 1.0Ω | Unconfirmed for G3 specifically — check display on your unit at pod insertion | N/A | MTL (estimated — not confirmed) | Salt nicotine expected | Not stated as fact here |
On the 1.0Ω pod: VOOPOO lists it as an available variant for the Argus Top Fill Cartridge V2 series, and the Argus G3 accepts pods within its 0.4-3.0Ω range. However, we have not found a manufacturer-published wattage window specifically for the 1.0Ω pod in the G3. If you buy the 1.0Ω pod, check the display the moment you insert it: the GENE.AI 2.0 chip will show the recommended min/max wattage range on-screen. Use those numbers, not any figure from this article or any other source.
Why running 50mg salt nicotine through the 0.4Ω pod is a mistake: The 0.4Ω pod at its 25W auto-set is designed for freebase e-liquid with a VG-forward blend. At that wattage, the vapour volume and temperature will make a 50mg salt nicotine liquid unbearable. Most people who try this abandon the device within a few days — not because the device failed, but because the pairing was wrong from the start. We would rather explain this before you order than have you decide the Argus G3 is not for you when it is the liquid choice that was the problem. The compound propylene glycol (PG), the carrier that determines throat hit intensity, is documented by the National Institutes of Health’s PubChem database as a substance with recognised irritant properties in concentrated or high-temperature vapour conditions — which is exactly what you get when you push high-mg salt through a low-resistance coil at high wattage.
How the iCOSM CODE 2.0 Technology Works (and What VOOPOO Claims Versus What Has Been Tested)
VOOPOO built the Argus Top Fill Cartridge V2 around a three-part coil structure: a Liquid-Seal Shield around the oil inlet, a Mega-Core (a speed-control cotton layer inside the mesh coil structure), and Golden Cotton described by VOOPOO as aerospace-grade material. The stated outcomes are: 30-day leak resistance, 100ml e-liquid endurance per pod, and consistent flavor from first fill to last.
VOOPOO rates this coil system at 100ml endurance. That is the manufacturer’s figure, not a tested result from us. VapingHardware, who ran the device for several weeks before publishing, reported passing approximately 120ml through the 0.7Ω pod and 90ml through the 0.4Ω pod with both still performing at time of writing. That is a credible data point from a single reviewer, not a controlled test. Real coil life will vary based on how often you vape, the wattage you run, and your liquid’s sweetener content. Sweetened e-liquids caramelise on coils faster than unflavoured or lightly-flavoured ones. We cannot give you a single figure for how long your pod will last because the variables are too wide.
What we can tell you is that the Mega-Core wick design has a practical consequence for filling: because the coil is physically larger than previous ARGUS pod designs, filling the pod requires patience. You squeeze liquid in, let air bubbles escape, and repeat. Rushing the fill or force-filling causes air pockets, which cause dry hits, which means you will taste a burnt draw from a pod that is not actually degraded.
The fix is to fill slowly and wait 10-15 minutes before your first draw on a new pod.
The No Fire Button: Why It Is a Design Decision, Not a Defect
Every reviewer who used the Argus G2 before the G3 notices the missing fire button. On the G2, you could press the button to vape or draw to vape. The G3 is draw-only. The button navigates menus.
This is not a malfunction. The draw sensor on the G3 is sensitive and consistent — VapingHardware found it responsive even to gentle draws with the airflow fully open. For switchers coming from cigarettes, draw-activation is more intuitive because it mirrors the physical action of smoking. For heavy vapers who chain-vape or prefer precise control over puff initiation, the loss of button-fire is a real limitation.
The three screen themes — confirmed as SMART, SPORT, and MUSIC by independent technical review (some documentation also labels them SMART, SUPER, and DIAMOND — verify the label on your unit’s display) — are cosmetic display choices. They change the animated graphics shown on the screen during a draw. They do not change wattage output or firing behavior.
Battery: The 1500mAh Reality
The 1500mAh battery is a meaningful upgrade from the Argus G2’s 1000mAh. VOOPOO rates it at five days of use per charge. That figure comes from VOOPOO’s marketing, not from our testing. Independent reviewers report a range of real-world outcomes.
VapingHardware averaged just over a day of use per charge at 10W on the 0.7Ω pod, and approximately 14 hours at 14W on the 0.4Ω pod. The ECF reviewer running the 0.7Ω pod at maximum 18W with the airflow fully open and chain-vaping achieved about 2.5 days. These are three data points, not a definitive range, because every user’s vaping frequency and wattage setting is different. What they confirm is that the “five days” claim assumes moderate use at lower wattage. If you vape frequently at higher wattage settings, plan on charging every day or every other day.
Charging via Type-C at 5V/2A takes approximately 45 minutes by VOOPOO’s specification. Both VapingHardware and Vaping360 recorded charges completing in 37-38 minutes in practice, meaning the manufacturer has underquoted rather than overquoted here. The device has pass-through charging, so you can vape while it is on the cable.
One charging note: the TFT display shows a charging animation briefly after you plug in, then the screen goes dark. This does not mean charging has stopped. The device is still charging; press the button once to wake the display and check the battery percentage. Battery University’s lithium-ion safety documentation is clear that li-ion cells should be charged on non-flammable surfaces and not left unattended overnight. That applies to this device and to any vape kit with a built-in battery.
Verifying Authenticity Before You Pay: The Only Steps That Count
Counterfeit Argus G3 units circulate in Dhaka’s grey market. The price difference between a clone (appearing on Daraz and social media at 1,990-2,500 BDT) and a genuine unit (3,800 BDT at KandyVape) is explained by one thing: the clone is not what is on the box. A fake Argus G3 will not have the GENE.AI 2.0 chipset, will not auto-limit wattage per pod type, and may not have functional safety protections against short circuit or overcharge.
VOOPOO’s three-step authenticity process works as follows. First, tilt the holographic VP mark on the box under light — it should display the “VP” letters shifting through multiple colors as you rotate it. A flat-printed mark that does not shift is the first sign of a clone. Second, scratch the silver panel on the security label to reveal the QR code and the alphanumeric security code. Scan the QR code with your phone camera. Third, enter the security code at voopoo.com/securitycode.html and check the result.
Two outcomes indicate a problem. If the code returns “not found,” the unit is a clone with a fabricated code. If the code returns “already verified,” it means the code was checked before the unit reached you — which could indicate the device is second-hand, was checked at a grey-market import point, or has been copied from a genuine unit’s packaging. Genuine units sold new by an authorised seller should return a first-time verification result.
We stock genuine VOOPOO units, and you can check the code on any box we sell before the transaction is completed, either online before dispatch or in person at Mohammadpur.
Physical indicators of a clone: noticeably lighter than the 54g device weight (bring the spec sheet, not just your impression), blurry or slightly misaligned screen-print on the ARGUS branding on the body, a button that has no tactile click, or a screen that fails to display the pod resistance and wattage range the moment a pod is inserted. That auto-display on pod insertion is a GENE.AI 2.0 chip behavior — if the screen does not briefly show resistance and recommended wattage when you insert the pod, the chipset is wrong.
Backward Compatibility: What Pods Work in the Argus G3
Previous ARGUS pods (the original Argus Top Fill pods from the G and G2 era) are compatible with the Argus G3. The Argus Top Fill Cartridge V2 pods are also backward-compatible with older ARGUS devices. This means if you are upgrading from an Argus G2, your existing pod stock works in the G3 while you use it up. When those pods are finished, you move to the V2 pods and the iCOSM CODE 2.0 system.
The G3 accepts any pod within its 0.4-3.0Ω resistance range. The GENE.AI 2.0 chip will read the resistance and set appropriate wattage limits automatically. This is not a promise that every third-party pod will perform well — it is a statement of the technical compatibility range. Stick to genuine VOOPOO Argus pods for predictable performance.
Dhaka Pricing Context and the Grey Market Gap
We stock the Argus G3 at 3,800 BDT. Listings on Daraz and informal social media channels show this device (or something described as this device) at 1,990 BDT to 2,500 BDT. The gap has two explanations. Some lower-listed items are the Argus G3 Lite, which is a different, lesser device with different specs. Others are clones described as genuine. Neither explanation involves a seller who simply has a better price on the same product.
As a note on our KandyVape shipping policy: orders dispatch daily at 3:00 PM including weekends. Free shipping applies on orders of 3,500 BDT and above — the Argus G3 at 3,800 BDT qualifies. Delivery rates and windows below that threshold are listed on the
What We Have Not Mentioned: The WHO’s Position on E-Cigarettes
We do not make health claims for vaping in our own voice. The World Health Organization’s position, as stated on their official Q&A page on tobacco and e-cigarettes, is that e-cigarettes are not safe and that nicotine is highly addictive. That is the WHO’s finding, attributed to them. We stock these products for adults who have already made an informed decision to vape, not to encourage anyone to start.
FAQ
Q: Does the Voopoo Argus G3 come with two pods or one?
The standard kit includes two Argus Top Fill Cartridge V2 pods: one 0.4Ω and one 0.7Ω, both 3ml capacity. The 0.7Ω pod is pre-installed when you open the box. Both use integrated coils — the coil is part of the pod and is not separately replaceable unless you buy the empty pod shell that accepts ITO coils, which is sold separately.
Q: Which pod should I use if I vape salt nicotine?
Use the 0.7Ω pod for salt nicotine. The 0.7Ω pod is chip-limited to 18W maximum and produces a tighter, cooler MTL draw, which is the correct pairing for salt nicotine at 20mg-50mg. Running high-mg salt nicotine through the 0.4Ω pod at its higher wattage range will produce a harsh, intense throat hit that most people find unusable within a short time.
Q: Can I use my old Argus G2 pods in the Argus G3?
Yes. Original ARGUS Top Fill pods from the G and G2 generation are compatible with the Argus G3. The GENE.AI 2.0 chip reads the resistance of whatever pod is inserted and adjusts accordingly. However, those older pods will not have iCOSM CODE 2.0 technology, so you will not get the extended coil life or leak-proof characteristics that the V2 pods offer.
Q: When will my order arrive if I place it today?
KandyVape dispatches orders daily at 3:00 PM, including weekends. If you order before 3:00 PM, your order goes out the same day. Delivery windows and charges are listed on our shipping and delivery policy page. If you prefer to collect in person and inspect the box before paying, our shop is at Shop #22, Level #3, Sahabuddin Plaza, Adabar, Mohammadpur 1207, Dhaka.
Q: What if the Argus G3 does not suit me after I buy it?
KandyVape operates a strict no-return, no-refund policy on all products. This applies to the Argus G3 and all hardware we stock. This is precisely why this article is as detailed as it is. The pod pairing table, the wattage guidance, the authenticity check steps, and the first-fill instructions are all here so that your first decision is the right one.
Q: How do I know if my Argus G3 is genuine?
VOOPOO provides a three-step process: check the holographic VP mark shifts color under light, scratch the security label to reveal the QR code and alphanumeric code, scan the QR code or enter the code at voopoo.com/securitycode.html. A first-time “verified” result confirms the unit is genuine and unregistered. An “already verified” result or “not found” result should be raised with your seller before completing the purchase.
Q: What e-liquid VG/PG ratio works best with the Argus G3?
For the 0.7Ω pod, a 50/50 VG/PG ratio works well and feeds the wick consistently. For the 0.4Ω pod, a 70/30 VG/PG blend is more appropriate because the higher wattage range demands a thicker liquid to keep the wicking ports saturated. Thin liquids (high PG) in the 0.4Ω pod at higher wattage settings can wick too fast and cause dry hits.
What to Do Before You Order
If you vape salt nicotine, the 0.7Ω pod is your pod. If you have already switched to freebase and prefer more vapour with a looser draw, the 0.4Ω pod is the right starting point. The Argus G3 at 3,800 BDT includes both pods in the box, so either way you have the other to try once you understand the device.
If you want to see the box, check the authentication sticker, and verify the holographic mark before committing, our Mohammadpur shop is open for in-person purchases. If you are ordering online, place before 3:00 PM for same-day dispatch. The no-return policy is firm, and this article exists because of that — use it before you buy, not after.
